UTT Technologies Chapter 3 Quick Setup
http://www.uttglobal.com
Page 31
authenticate and attempt to associate with the remote AP. However, even if the
Wireless Router can complete authentication and associate with the remote AP,
the Wireless Router cannot send or receive data from the remote AP unless it
has the correct WEP key.
●
Shared Key:
It requires that the Wireless Router and remote AP have the same
WEP key to authenticate. Without the correct key, authentication will fail and the
Wireless Router
won’t be allowed to associate with the remote AP.
Key Format:
It specifies the format for entering the WEP keys. The options are
Hex
and
ASCII
.
●
Hex:
Select this option if you want to enter the WEP keys in hexadecimal format.
Hexadecimal digits are a set of characters that includes numbers 0 through 9
and letters A through F (or a through f). Hex WEP keys are case insensitive.
●
ASCII:
Select this option if you want to enter the WEP keys in ASCII format.
ASCII WEP keys are case sensitive.
Default Tx Key:
It allows you to select one of the WEP keys as the default transmit
key to transmit data.
All keys can be used to receive data.
WEP Key:
It allows you to enter a key in one of the
WEP Key
boxes. You can enter
up to four WEP keys. You should enter a key according to the
Key Format
and
Key
Type
selected.
●
For 64-bit encryption, enter 10 hex characters or 5 ASCII characters.
●
For 128-bit encryption, enter 26 hex characters or 13 ASCII characters.
Key Type:
It allows you to select the size of each key, and it also allows you to
disable or enable each key. The options are
Disabled
,
64-bit
and
128-bit
. By default,
Disabled
is selected, which means the key is of no effect.
Back:
Click to go back to the previous page of the
Setup Wizard
.
Cancel:
Click to revert to the last saved settings.
Exit:
Click to exit the
Setup Wizard
and go to the
Welcome
page (see Figure 3-5).
The changes made in the
Setup Wizard
will be discarded.
Skip:
Click to go directly to the next page of the
Setup Wizard
. The changes made
on the current page will be discarded.
Next:
Click to go to the next page of the
Setup Wizard
.
