UTT Technologies Chapter 8 User
Management
http://www.uttglobal.com
Page 143
the current PPPoE account to dial up.
●
Auto:
If you want to create account/MAC binding for the current PPPoE account
automatically, select this option. That is, the Device will automatically bind the
PPPoE account to the MAC address of the user who uses this account to
establish a PPPoE session firstly. After that only this user can use the account.
●
Manual:
If you want to create account/MAC binding for the current PPPoE
account manually, select this option, and configure up to four MAC addresses
that are bound to the account. Then only the users with one of these MAC
addresses can use the account.
Max Sessions:
It specifies the maximum number of PPPoE sessions that can be
created by using the current PPPoE account.
Static IP Address:
It specifies a static IP address that is assigned to the user who
uses the current PPPoE account. It must be a valid IP address within the range of IP
addresses assigned by the PPPoE server.
Select Account Group:
Select PPPoE accounts that need to enable account mode.
The account group is configured in the
User Management > User Group
page.
Select
Account Group
in Group Type.
Account Mode:
Select the check box to enable account mode.
Account Effective Date:
It specifies the start effective date of the PPPoE account. If
the current date is before the
Account Effective Date
, the account cannot be used
because it
’s been disabled by the device.
Account Expiration Date:
It specifies the expiration (end) date of the PPPoE
account. If the current date is after the
Account Expiration Date
, the account cannot
be used because it
’s been disabled by the device.
Max Tx Bandwidth:
It specifies the maximum upload bandwidth of a PPPoE dial-in
user that uses the current PPPoE account.
Max Rx Bandwidth:
It specifies the maximum download bandwidth of a PPPoE
dial-in user that uses the current PPPoE account.
Remarks:
It remarks the PPPoE account.
Save:
Click to save your changes.
Cancel:
Click to revert to the last saved settings.
Back:
Click to go back to the
PPPoE Account List
.
