UTT HiPER 518W, Advanced Configuration Manual

Page: 107 / 295

UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com Page 99
2. Configuration Steps
Step 1 Go to the Wireless > MAC Filtering page.
Step 2 Click the Add button to go to MAC Address Filtering Settings page (see
Figure 6-21), enter 00b08c0517ed in the MAC Address text box, and then
click the Save button.
Figure 6-21 Adding a MAC Address Filtering Entry - Example
Step 3 Continue to add the other two MAC addresses (001f3c47f481 and 001f3c0f07f4)
to the MAC Address Filtering List .
Step 4 Select the Enable MAC Address Filtering check box, choose Block as the
Filtering Mode , and then click the Save button.
Figure 6-22 MAC Address Filtering Global Settings - Example
Now the configuration is complete, and you can view the three MAC address filtering
entries in the MAC Address Filtering List . If you have entered an incorrect MAC address,
directly click its icon to go to the MAC Address Filtering Settings page to modify it,
and click the Save button to save the change.
Figure 6-23 MAC Address Filtering List - Example