UTT Technologies Chapter 8 User
Management
http://www.uttglobal.com
Page 154
8.5.4 How to Add the User Groups
If you want to add one or more User Groups, do the following:
Step 1
Go to the
User Management > User Group
page, and then click
the
Add
button to go to the setup page.
Step 2
Specify the
Group Name
of the User Group.
Step 3
Select the group type from the
Group Type
drop-down list.
Step 4
Add IP addresses to the group. There are two methods to add them.
1) Method One: Select
the
New Address
radio button, enter the start and end
IP addresses in the
Start Address
and
End Address
text boxes, and then
click
==>
to move the new address range to the
Address Members list
box. You can continue to add another address ranges if needed.
2) Method Two: Select
the
Existing Group
radio button, select one or more
configured User Groups, and then click
==>
to move the selected User
Groups to the
Address Members
list
box.
Step 5
Click the
Save
button to save the settings. You can view the User Group in the
User Group List
.
Step 6
If you want to add another new User Group, please repeat the above steps.
8.5.5 How to Edit an User Group
If you want to modify a configured User Group, do the following:
Step 1
Go to the
User Management > User Group
page.
Step 2
Click the
Edit
hyperlink of the User Group in the
User Group List
to go to the
setup page.
Step 3
Modify the address members as required. There are two cases:
1) If you want to modify an address range, select the address range in the
Address Members
list, click
<==
to move it from the
Address Members
list box to the left editable list, and then modify the
Start Address
and/or
End Address
, lastly click
==>
to move the modified address range to the
Address Members
list box again.
2) If you want to delete an address member, select the member in the
Address Members
list box, and then click
the
Delete
button.
