UTT Technologies Chapter 6 Wireless
http://www.uttglobal.com
Page 102
6.5
Wireless Client List
This section describes the
Wireless > Client List
page.
In the
Wireless Client List
, you can view the status of all wireless clients which are
connected to the Wireless Router. In addition, you can also easily configure MAC address
filtering entries via the list.
Figure 6-25 Wireless Client List
ID:
It is used to identify each wireless client entry in the list.
MAC Address:
It displays the MAC address of the wireless client.
Filtered:
It indicates whether the corresponding MAC address has been added to the
MAC Address Filtering List
in the
Wireless > MAC Filtering
page. If the MAC
address has been added to the
MAC Address Filtering List
, the
Filtered
check box
is checked. Else, the
Filtered
check box is cleared; and in this case, you can click the
check box to add the MAC address to the
MAC Address Filtering List
.
Channel Width:
It displays the current channel width in MHz.
Filter All:
Click to select the
Filtered
check boxes of all MAC addresses and add
them into the
MAC Address Filtering List
, except those already added.
Refresh:
Click to view the latest information in the list.