UTT HiPER 518W Advanced Configuration Manual Download Page 16

Page: 16 / 295

UTT Technologies About This Manual

http://www.uttglobal.com

Page 8



QQ Whitelist:

How to configure and view QQ whitelist.



MSN Whitelist:

How to configure and view MSN whitelist.



Notification:

How to configure notification.



Application Audit:

How to view application audic.



Policy Database:

How to configure policy database.

Chapter 10 QoS



Fixed Rate Limiting:

How to configure fixed rate limiting.



Flexible Bandwidth:

How to configure flexible bandwidth.



P2P Rate Limit:

How to configure P2P rate limiting.



Session Limiting:

How to configure session limiting.

Chapter 11 Firewall

This chapter describes how to configure firewall features, including:



Attack Prevention:

How to configure attack prevention features.



Access Control:

How to configure access control rules to assign Internet access

privileges to the LAN users based on schedule, and to prevent external attacks.



Domain Filtering:

How to configure

domain filtering feature to block access to the

specified websites.



MAC Address Filtering:

How to configure MAC address filtering to block or allow

specified hosts.



Chapter 12 VPN

This chapter describes the PPTP and IPsec implementation, and how to configure the

Router as a server/client.

Chapter 13 System

This chapter describes how to perform maintenance activities on the Router, including:



Administrator:

How to add, view, modify and delete the administrator accounts.



Time:

How to set the system date and time manually or automatically.



Configuration:

How to backup and restore the system configuration, and reset the

Router to factory default settings.



Firmware upgrade:

How to backup, download and upgrade firmware.



Remote Management:

How to enable HTTP remote management feature to

remotely configure and manage the Router via Internet.



Scheduled Task:

How to create and view the scheduled tasks. Now the Router only

Summary of Contents for HiPER 518W








































































































































































































































































































Search results

Summary of Contents for HiPER 518W

Reviews:

Related manuals for HiPER 518W

Brands by name

Popular brands

UTT HiPER 518W, Advanced Configuration Manual

Search results

Summary of Contents for HiPER 518W

Reviews:

Related manuals for HiPER 518W

Brands by name

Popular brands