UTT Technologies Chapter 8 User
Management
http://www.uttglobal.com
Page 141
password.
PPP Authentication:
It specifies the PPP authentication mode by which the PPPoE
server authenticates a PPPoE client. The available options are
PAP
,
CHAP
and
AUTO
. In most cases, please leave the default value of
AUTO
, which means that the
Router will automatically choose
PAP
or
CHAP
to authenticate the PPPoE client.
Maximum Sessions:
It specifies the maximum number of PPPoE sessions that can
be created on the Router.
Save:
Click to save your changes.
Cancel:
Click to revert to the last saved settings.
8.3.3 PPPoE Account List
Figure 8-14 PPPoE Account List
Add a PPPoE Account:
To add a new PPPoE account, first click
the
Add
button to
go to the setup page, next configure it, lastly click the
Save
button.
Enable
a PPPoE Account:
The
Enable
check box is used to enable or disable the
corresponding PPPoE account. The default value is selected, which means the
PPPoE account is in effect. If you want to disable the PPPoE account temporarily
instead of deleting it, please click it to remove the check mark.
View PPPoE Account(s):
When you have configured one or more PPPoE accounts,
you can view them in the
PPPoE Account List
.
Modify a PPPoE Account:
To modify a configured PPPoE account, click its
User
Name
hyperlink or
icon, the related information will be displayed in the setup
page. Then modify it, and click the
Save
button.
Delete PPPoE Account(s):
There are three ways to delete PPPoE account(s).
