UTT HiPER 518W Advanced Configuration Manual Download Page 218

Page: 218 / 295

UTT Technologies Chapter 12 VPN

http://www.uttglobal.com

Page 210

12.1.6 How to Add, View, Edit and Delete PPTP Clients

or Server Entries

Add a PPTP Client or Server Entry:

If you want to add a PPTP client or server entry,

click on

Add Client

Add Server

button to go to setup page, and then configure it,

lastly click the

Save

button.

View PPTP Client and/or Server Entry(s):

When you have configured some PPTP

clients and/or server entries, you can view them in the

PPTP List

Enable

a PPTP Client or Server Entry:

The

Enable

check box is used to enable or

disable the corresponding PPTP server or client entry. The default value is checked,

which means the entry is in effect. If you want to disable a PPTP server or client entry

temporarily instead of deleting it, please click its

Enable

check box to remove the

check mark.

Edit a PPTP Client or Server Entry:

If you want to modify a configured PPTP client

or server entry, click its

Edit

hyperlink, the related information will be displayed in the

setup page. Then modify it, and click the

Save

button.

Delete PPTP Client and/or Server Entry(s):

If you want to delete one or more PPTP

client and/or server entries, select the leftmost check boxes of them, and then click

the

Delete

button.

Summary of Contents for HiPER 518W








































































































































































































































































































Search results

Summary of Contents for HiPER 518W

Reviews:

Related manuals for HiPER 518W

Brands by name

Popular brands

UTT HiPER 518W, Advanced Configuration Manual

Search results

Summary of Contents for HiPER 518W

Reviews:

Related manuals for HiPER 518W

Brands by name

Popular brands