Unipulse TM380, Operation Manual

Page: 28 / 147

17
3 SETTING MODE CONFIGURATION
17
SET
TING MODE CONFIGURATION
Chapter
3
H I LO HOLD
Torque
Speed rpm
Nm
H I LO HOLD
Torque
Speed rpm
Nm
F5 (Mode 5)
Option setting
BCO D3V 232/USB
1: Output Data
Select
(P81)
RECALL RECALL
RECALL
DAV/DAI
RECALL
F7 (Mode 7)
Encoder setting
RECALL
RECALL
1: Use of Encoder
(P35)
H I LO HOLD
Torque
Speed rpm
Nm
Angle rad deg Angle rad deg Angle rad deg
RECALL
RECALL
H I LO HOLD
Torque
Speed rpm
Nm
Angle rad deg
1: Output Data
Select
(P94)
1: Output Data
Select
(P101)
2: Output Rate
(P82)
2: Zero Scale Value 1
(Torque)
(P96)
2: Zero
Scale Value
(P102)
3: BCD/Binary
Select
(P83)
3: Delimiter
(P87)
3: Full Scale Value 1
(Torque)
(P96)
3: Full
Scale Value
(P102)
RECALL RECALL RECALL
4: Zero Scale Value 2
(Rotation speed)
(P96)
5: Full Scale Value 2
(Rotation speed)
(P96)
6: Zero Scale Value 3
(Angle)
(P96)
7: Full Scale Value 3
(Angle)
(P96)
*
As for an option setting, a setting item is different
depending on the installed option.
Moreover, a set item is not displayed when there is no
option.
3: Unit (Angle)
(P36)
4: Direction
(P37)
6: Zero Clear
(P38)
8: Angle Analog
Output Select
(P98)
4: Angle Analog
Output Select
(P103)
F6 (Mode 6)
RS-485 setting
2: UTM/UTF Setting
Value Read
(P72)
3: UTM/UTF Filter
Setting
(P72)
4: UTM/UTF Rotation
Speed Filter
(P73)
7: RS-485 Dedicated
Rated Capacity Value
(P74)
8: RS-485 Terminator
(P75)
5: UTM/UTF Minimum
Rotation Speed Display
(P73)
6: UTM/UTF Assigned
Action
(P74)
1: RS-485
Communication mode
(P71)
3: Initialize
(P130)
1: Setting Protect
(P128)
2: Key Protect
(P129)
4: Password
(P130)
9: Record Data Clear
(P78)
F9 (Mode 9)
Protect/Initialize
1: Communication
Mode
(P85)
2: Communication
Condition
(P86)
2: Encoder Pulse
(P36)
5: Minimum Scale
(Angle)
(P37)