Unipulse TM380, Operation Manual

Page: 15 / 147

4
1 OUTLINE
4
OUTLINE
Chapter
1
Setting key pad
These are keys for commanding settings and operations.
- Use this key to go to a setting mode state.
- Use this key to cancel setting/execution.
- Use this key to go back from a setting mode state to an indication display state.
- Use this key to take a shortcut from an indication value display state to HI/LO limit
setting.
- Use this key to go from an indication value display state to Digital Zero ready state
of the torque, or to execute Zero Clear (Angle).
- Use this key to execute/release the hold in an indication value display state.
- Use this key to switch the setting in HI/LO limit setting mode.
- Use this key to set whether or not to sign a setting value, when available, in a setting
value input state.
- Use this key to select a trailing setting item number in a setting mode state.
- Use this key to select the previous item number in a setting item select state.
- Use this key to increment the numerical value by one in a setting value input state.
- Use this key to go from an indicated value display state to history mode (record data
display).
- Use this key to select a leading setting item number in a setting mode state.
- Use this key to select the next item number in a setting item select state.
- Use this key to decrement the numerical value by one in a setting value input state.
- Use this key to execute Digital Zero reset in a Digital Zero ready state.
- Use this key to increment the leading setting mode number by one in a setting mode
state.
- Use this key to move the setting digit by one in the lower direction in a setting value
input state.
- Use this key to execute Digital Zero in a Digital Zero ready state.
- Use this key to move to a setting value input state in a setting item select state.
- Use this key to validate the setting value in a setting value input state.
FNC
ESC
H
I
/LO
ZERO
HOLD
＋/－
RECALL