Unipulse TM380, Operation Manual

Page: 141 / 147

130
12 SUPPLEMENTS
130
SU
PPLEM
E
N
T
S
Chapter
12
12-5.
Initialize
Each category of setting values can be initialized.
For each category, see the setting value list.
≪
Setting value
≫
(0: Undefined)
1: Work setting (Including record data)
2: System setting (Including setting protect and key protect)
3: Calibration setting
After inputting the number of the setting value category you want to initialize, press to
validate it, and initialization is executed.
However, if the category is protected, initialization cannot be performed.
Normally, the setting value of "initialize" is "0 (undefined)."
■
Initialize setting method
1.
Select setting mode 9.
Press → seven times.
2.
Excecute initialization.
Press three times.
⇒
"Initialize" is displayed.
Press , and blinks.
Input the setting value for initialization with
.
Press to validate it.
* Upon validation, initialization is executed and the setting value goes back to "0."
3.
Press twice to go back to the indicated value display.
12-6.
Password
This setting is for maintenance and inspection. Do not operate it.
Speed
rpm
Angle rad deg
FNC
Torque
Speed
rpm
Nm
H I LO HOLD
Angle rad deg
RECALL
RECALL
ESC