Unipulse TM380, Operation Manual

Page: 65 / 147

54
6 EXPLANATION OF COMPARISON FUNCTIONS
54
EX
PLAN
ATION
OF C
O
MPAR
IS
ON FUN
C
TION
S
Chapter
6
■
Timing output
Outputs a signal in synchronization with current torque value.
ON
：
Torque timing output LO limit
≦
Torque
≦
Torque timing output HI limit
OFF
： Torque ＜ Torque timing output LO limit
Torque
＞
Torque timing output HI limit
Torque timing output HI limit: -99999 to 99999
Torque timing output LO limit: -99999 to 99999
1.
Select setting mode1.
Press once.
2.
Set "Torque timing output HI limit."
Press five times.
⇒
"Torque timing output HI
limit" is displayed.
Press , and the highest digit blinks.
Input the setting value with .
Move to the lower digits with . (Initial value: 99999)
Press to validate it.
3.
Set "Torque timing output LO limit."
Press once. ⇒ "Torque timing output LO limit"
is displayed.
Press , and the highest digit blinks.
Input the setting value with .
Move to the lower digits with . (Initial value: -99999)
Press to validate it.
Press twice to go back to the indicated value display.
B2 output can be either timing output or absolute value output.
Refer to "5-12.Absolute value display select" on page 48 for absolute value
display select.
Point
Speed
rpm
Angle rad deg
FNC
Torque
Speed
rpm
Nm
H I LO HOLD
Angle rad deg
RECALL
RECALL
Torque
Speed
rpm
Nm
H I LO HOLD
Angle
rad deg
RECALL
RECALL
ESC