Ubiquiti ES-24-250W, Administration Manual

Page: 89 / 274

88
Configuring System Information EdgeSwitch
™
Administration Guide
Ubiquiti Networks, Inc.
Time-Based Group Statistics Fields (Continued)
Field Description
Reporting Methods The methods for reporting the collected statistics at the end of every configured time range interval.
The available options are:
• None The statistics are not reported to the console or an external server. They can be viewed only
by using the EdgeSwitch UI or by issuing a CLI command.
• Console The statistics are displayed on the console.
• E-Mail The statistics are sent to an e-mail address. The SNTP server and e-mail address
information is configured by using the appropriate Email Alerts pages.
• Syslog The statistics are sent to a remote syslog server. The syslog server information is
configured on the Logging Hosts page.
Interfaces The interface or interfaces on which data is collected. To select multiple interfaces when adding a new
group, press and hold CTRL, and then click each interface to include in the group.
Use the buttons to perform the following tasks:
• To add a set of time-based traffic group statistics to collect, click
Add
, configure the desired settings, and
then click
Submit
to apply the changes.
• To delete one or more time-based statistics groups, select each entry to delete and click Remove .
• Click Refresh to refresh the data on the screen with the present state of the data in the switch.
To retain the changes across the switch’s next power cycle, click System > Configuration Storage > Save .
Time-Based Flow Statistics
Use this page to define criteria for collecting time-based statistics for specific traffic flows. The statistics
include a per-interface hit count based on traffic that meets the match criteria configured in a rule for the
interfaces included in the rule. The hit count statistics are collected only during the specified time range. The
statistics application uses the system clock for time-based reporting. Configure the system clock (manually or
through SNTP) before using the time-based statistics feature.
To access the
Time-Based Flow Statistics page, click System > Statistics > Time Based > Flow Based in the
navigation menu.
Time-Based Flow Statistics