82
Configuring System Information
EdgeSwitch
™
Administration Guide
Ubiquiti Networks, Inc.
Port Summary
The
Port Summary Statistics
page shows statistical information about the packets received and transmitted
by each port and LAG.
To access the page, click
System
>
Statistics
>
System
>
Port Summary
in the navigation menu.
Port Summary Statistics
Port Summary Statistics Fields
Field
Description
Interface
Identifies the port or LAG.
Rx Good
The total number of inbound packets received by the interface without errors.
Rx Errors
The number of inbound packets that contained errors preventing them from being deliverable to a
higher-layer protocol.
Rx Bcast
The total number of good packets received that were directed to the broadcast address. Note that this
number does not include multicast packets.
Tx Good
The total number of outbound packets transmitted by the interface to its Ethernet segment
without errors.
Tx Errors
The number of outbound packets that could not be transmitted because of errors.
Tx Collisions
The best estimate of the total number of collisions on this Ethernet segment.
Use the buttons to perform the following tasks:
• Click
Clear Counters
to clear all the statistics counters, resetting all summary and detailed statistics for
this switch to default values. The discarded packets count cannot be cleared.
• Click
Clear All Counters
to clear counters for all switches in the stack.
• Click
Refresh
to refresh the page with the most current data from the switch.
To retain the changes across the switch’s next power cycle, click
System
>
Configuration Storage
>
Save
.
