manualshive.com logo in svg

Ubiquiti ES-24-250W, Administration Manual

Share
Download
Ubiquiti ES-24-250W Administration Manual Download Page 30

29

Configuring System Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

IPv6 Network Connectivity

IPv6 Network Connectivity Fields

Field

Description

IPv6 Mode

Enables or disables IPv6 mode.

Network Configuration 
Protocol

Specifies whether the device should attempt to acquire network information from a DHCPv6 server.  
The factory default is 

None

, which disables the DHCPv6 client on the network interface. 

IPv6 Stateless Address 
AutoConfig Mode

Sets the IPv6 stateless address autoconfiguration mode on the network interface.

• 

Enabled 

The network interface can acquire an IPv6 address through IPv6 Neighbor Discovery 

Protocol (NDP) and the use of Router Advertisement messages.

• 

Disabled 

The network interface will not use the native IPv6 address autoconfiguration features to 

acquire an IPv6 address.

DHCPv6 Client DUID

The client identifier used by DHCPv6 Client when sending messages to the DHCPv6 Server. Displayed 
only if IPv6 

Network Configuration Protocol

 is set to 

DHCP

.

IPv6 Gateway

The default gateway for the IPv6 network interface. Use the buttons to perform the following:

Click this button to change the field’s setting.
Click this button to reset the field to the default value.

Static IPv6 Addresses

The configured static IPv6 addresses. Use the buttons to perform the following:

Click this button to add an IPv6 address by configuring the 

New IPv6 Address

 and 

EUI Flag

 fields in 

the 

Add IPv6 Address

 dialog box.

To remove an IPv6 address, select it and then click this button. To remove 

all

 IPv6 addresses, click 

this button in the heading row.

New IPv6 Address

Specifies the IPv6 address being added.

EUI Flag

Sets the EUI flag while configuring a new IPv6 address when selected. The default is option not 
selected.

Dynamic IPv6 Addresses

The configured dynamic IPv6 addresses.

Default IPv6 Routers

The default IPv6 Router address(es).

Use the buttons to perform the following tasks:

•  If you change any of the network connectivity parameters, click 

Submit

 to apply the settings immediately 

to the running configuration. 

•  Click 

Refresh

 to refresh the page with the most current data from the switch.

To retain the changes across the switch’s next power cycle, click 

System

 > 

Configuration Storage

 > 

Save

.

Summary of Contents for ES-24-250W



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands