183
Configuring Switching Information
EdgeSwitch
™
Administration Guide
Ubiquiti Networks, Inc.
LLDP-MED Interface Summary
LLDP-MED Interface Summary Fields
Field
Description
Interface
The interface associated with the rest of the data in the row. When configuring LLDP-MED settings,
this field identifies the interfaces that are being configured.
Link Status
The link status of the interface, which is either
Up
or
Down
. An interface that is down does not forward
traffic.
MED Status
The administrative status of LLDP-MED on the interface. When LLDP-MED Mode is enabled, the
transmit and receive function of LLDP is effectively enabled on the interface.
Notification Status
Indicates whether LLDP-MED topology change notifications are enabled or disabled on the interface.
Operational Status
Indicates whether the interface will transmit TLVs.
Transmit TLVs
The LLDP-MED TLV(s) that the interface transmits:
•
0
Capabilities
•
1
Network Policy
Use the buttons to perform the following tasks:
• To add an entry to the table, click
Add
, configure the fields, and click
Submit
to apply the changes.
• To
change an entry, select the entry from table, and click Edit. When you have completed the
changes, click Submit
to apply the changes.
• To remove an entry, select it from the table, click
Remove
, and confirm the deletion.
• Click
Refresh
to refresh the page with the most current data from the switch.
To retain the changes across the switch’s next power cycle, click
System
>
Configuration Storage
>
Save
.
