manualshive.com logo in svg

Ubiquiti ES-24-250W, Administration Manual

Share
Download
Ubiquiti ES-24-250W Administration Manual Download Page 109

108

Configuring System Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

DHCP Server Statistics

Use the 

DHCP Server Statistics

 page to view information about the DHCP server bindings and messages. To 

access the page, click 

System

 > 

Advanced

 

Configuration

 > 

DHCP

 

Server

 > 

Statistics

 in the navigation menu.

DHCP Server Statistics

DHCP Server Statistics Fields

Field

Description

Automatic Bindings

Shows the number of automatic bindings on the DHCP server.

Expired Bindings

Shows the number of expired bindings on the DHCP server.

Malformed Messages

Shows the number of the malformed messages.

Message Received section:

DHCPDISCOVER

Shows the number of DHCPDISCOVER messages received by the DHCP server.

DHCPREQUEST

Shows the number of DHCPREQUEST messages received by the DHCP server.

DHCPDECLINE

Shows the number of DHCPDECLINE messages received by the DHCP server.

DHCPRELEASE

Shows the number of DHCPRELEASE messages received by the DHCP server.

DHCPINFORM

Shows the number of DHCPINFORM messages received by the DHCP server.

DHCPOFFER

Shows the number of DHCPOFFER messages sent by the DHCP server.

DHCPACK

Shows the number of DHCPACK messages sent by the DHCP server.

DHCPNAK

Shows the number of DHCPNAK messages sent by the DHCP server.

Message Sent section:

DHCPOFFER 

The number of DHCP offer messages the DHCP server has sent to DHCP clients in response to DHCP 
discovery messages it has received.

DHCPACK 

The number of DHCP acknowledgement messages the DHCP server has sent to DHCP clients in 
response to DHCP request messages. The server sends this message after a client accepts the server’s 
offer. The message includes information about the lease time and any other configuration information 
that the DHCP client has requested. 

DHCPNAK 

The number of negative DHCP acknowledgement messages the DHCP server has sent to DHCP clients. 
This type of message is sent if the client requests an IP address already in use or if the server does not 
renew the lease.

Summary of Contents for ES-24-250W



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands