42
Configuring System Information
EdgeSwitch
™
Administration Guide
Ubiquiti Networks, Inc.
Accounting Selection Fields
Field
Description
Terminal
– The access methods in this section are CLI-based.
Telnet
The
Exec
accounting list and the
Commands
accounting list to apply to users who access the CLI using
a Telnet session.
SSH
The
Exec
accounting list and the
Commands
accounting list to apply to users who access the CLI using
a secure shell (SSH) session.
Hypertext Transfer Protocol
– The access methods in this section are through a web browser.
HTTP
The
Exec
accounting list and the
Commands
accounting list to apply to users who access the
web-based management interface using HTTP.
HTTPS
The
Exec
accounting list and the
Commands
accounting list to apply to users who access the
web-based management interface using secure HTTP.
Use the buttons to perform the following tasks:
• If you make changes to the page, click
Submit
to apply the changes to the running configuration.
• Click
Refresh
to refresh the page with the most current data from the switch.
To retain the changes across the switch’s next power cycle, click
System
>
Configuration Storage
>
Save
.
Authentication List Configuration
Use the
Authentication List Configuration
page to view and configure the authentication lists used for
management access and port-based (IEEE 802.1X) access to the system. An authentication list specifies
which authentication method(s) to use to validate the credentials of a user who attempts to access the
device. Several authentication lists are preconfigured on the system. These are default lists, and they cannot
be deleted. Additionally, the
List Name
and
Access Type
settings for the default lists cannot be changed.
To access the
Authentication List Configuration
page, click
System
>
AAA
>
Authentication List
in the
navigation menu.
Authentication List Configuration
