202
Configuring Routing
EdgeSwitch
™
Administration Guide
Ubiquiti Networks, Inc.
2. Next to
Route Type
, select one of the following:
•
Default
The route the device uses to send a packet if the routing table does not contain a longer
matching prefix for the packet’s destination. The routing table can contain only one default route.
•
Static
A route that is manually added to the routing table by an administrator.
•
Static Reject
A route where packets that match the route are discarded instead of forwarded. The
device might send an ICMP Destination Unreachable message.
3. Configure the remaining available fields in the
Add Route
dialog box.
Note:
The selected
Route Type
determines the fields that are available to be configured. Some of
the fields listed in the table
“Configured Routes Fields” on page 201
are not available when
configuring certain types of routes.
4. Click
Submit
to apply the changes.
The new route is added, and you are returned to the
Configured Routes
page.
