119
Configuring System Information
EdgeSwitch
™
Administration Guide
Ubiquiti Networks, Inc.
SNTP Global Status Fields (Continued)
Field
Description
Unicast Sever Max Entries
The maximum number of unicast server entries that can be configured on this client.
Unicast Server Current Entries
The number of current valid unicast server entries configured for this client.
Broadcast Count
The number of unsolicited broadcast SNTP messages that have been received and processed by the
SNTP client since last reboot.
Click
Refresh
to display the latest information from the router.
SNTP Server Configuration
Use the
SNTP Server Configuration
page to view and modify information for adding and modifying Simple
Network Time Protocol SNTP servers. To display the
SNTP Server Configuration
page, click
System
>
Advanced Configuration
>
SNTP
>
Server Configuration
in the navigation menu.
SNTP Server Configuration
SNTP Server Configuration Fields
Field
Description
SNTP Server
Select the IP address of a user-defined SNTP server to view or modify information about an SNTP
server, or click
Add
to configure a new SNTP server. You can define up to three SNTP servers.
Type
Select
IPv4
if you entered an IPv4 address,
DNS
if you entered a hostname.
Port
Enter a port number from
1
to
65535
. The default is
123
.
Priority
Enter a priority from
1
to
3
, with 1 being the highest priority. The switch will attempt to use the highest
priority server and, if it is not available, will use the next highest server.
Version
Enter the protocol version number.
Add SNTP Server
Dialog Box – When you click
Add
, this dialog box appears, containing the following additional field:
Host Name or IP Address
Specify the IPv4 address, IPv6 address, or DNS-resolvable host name of the SNTP server. Unicast SNTP
requests will be sent to this address. The address you enter is displayed in the SNTP Server field on the
main page. The address type is automatically detected.
Use the buttons to perform the following tasks:
• To add an SNTP server, click
Add
, configure the fields as needed, and click
Submit
to apply the changes.
The SNTP server is added and appears in the
SNTP Server
list.
• To modify settings for an existing SNTP server, select the entry to update, click
Edit
, update the fields as
needed, and click
Submit
to apply the changes. You cannot edit the host name of address of a server.
• To remove an SNTP server from the list, select each entry to delete, click
Remove
, and confirm the deletion.
• Click
Refresh
to refresh the page with the most current data from the switch.
To retain the changes across the switch’s next power cycle, click
System
>
Configuration Storage
>
Save
.
