manualshive.com logo in svg

Ubiquiti ES-24-250W, Administration Manual

Share
Download
Ubiquiti ES-24-250W Administration Manual Download Page 159

158

Configuring Switching Information

EdgeSwitch

™

 Administration Guide

 Ubiquiti Networks, Inc.

Multicast Forwarding Database GMRP Table

Use the 

Multicast Forwarding Database GMRP Table

 page to display the entries in the multicast forwarding 

database (MFDB) that were added by using the GARP Multicast Registration Protocol (GMRP). 
To access the page, click 

Switching

 > 

Multicast Forwarding Database

 > 

GMRP

 in the navigation menu.

Multicast Forwarding Database GMRP Table

Multicast Forwarding Database GMRP Table Fields

Field

Description

VLAN ID

The VLAN ID associated with the entry in the MFDB. 

MAC Address

The multicast MAC address associated with the entry in the MFDB. 

Type 

The type of entry, which is one of the following: 

• 

Static 

The entry has been manually added to the MFDB by an administrator. 

• 

Dynamic 

The entry has been added to the MFDB as a result of a learning process or protocol. 

Entries that appear on this page have been added by using GARP. 

Description 

A text description of this multicast table entry. 

Interface(s)

The list of interfaces that will forward or filter traffic sent to the multicast MAC address. 

Click 

Refresh

 to update the information on the screen with the most current data.

Multicast Forwarding Database IGMP Snooping Table

This page displays the entries in the multicast forwarding database (MFDB) that were added because they 
were discovered by the IGMP snooping feature. IGMP snooping allows the device to dynamically add or 
remove ports from IPv4 multicast groups by listening to IGMP join and leave requests. 
To access the page, click 

Switching

 > 

Multicast Forwarding Database

 > 

IGMP Snooping

 in the navigation menu.

Multicast Forwarding Database IGMP Snooping Table

Summary of Contents for ES-24-250W



















































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands