Page 1 of 101 pages
INCOMING INSPECTION
The autoclave should be unpacked and inspected for mechanical damage upon
receipt. Observe packing method and retain packing materials until the unit has
been inspected.
Mechanical inspection involved checking for signs of physical damage such as:
scratched panel surfaces, broken knobs, etc.
If damage is apparent, file a claim with the carrier. The manufacturer is
responsible for products shipped F.O.B. The autoclave is carefully inspected prior
to shipment and all reasonable precautions are taken in preparing it for shipment
to assure safe arrival at destination.
WARRANTY
We certify that this device is guaranteed to be free from defects in material and
workmanship for one year against faulty components and assembly.
The warranty does not include consumable items such as: gaskets, glassware,
printer thermal paper and heaters’ and does not replace routine treatment and
preventive maintenance to be performed according to instructions in paragraph
10.1
'Preventive and Periodical Maintenance.
This warranty does not include malfunction that result from clogged piping or any
other defect caused by the building utilities. This warranty is valid only if the water
quality, supplied to the machine, complies with the water quality requirements on
par
. 2.4.
Our obligation is limited to replacing the autoclave or parts, after our examination,
if within one year after the date of shipment they prove to be defective. This
warranty does not apply to any machine, which has been subjected to misuse,
neglect, accident or improper installation or application, nor shall it extend to
machines, which have been repaired or altered outside the factory without prior
authorization from us.
The autoclave should not be used in a manner not described in this manual!
Note
If there is any difficulty with this machine, and the solution is not covered in this
manual, contact our representative or us first.
Do not attempt to service this instrument yourself!
Stipulate
the model
and
serial number
(S.N.) and describe the difficulty as clearly
as possible so we may be able to diagnose the problem and hence provide a
prompt solution.
For technical information or service please contact our representative at:
Tuttnauer USA Co.
25 Power Drive Hauppauge
NY, 11788, USA
Tel:(800)624 5836, (631)737 4850
¬
Fax:(631)737 07 20
Email:
Our web site:
www.tuttnauer.com
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
