Page 34 of 101 pages
4.1 Description of panel 'CAT 2007'
The Operation Panel is composed of the following parts:
♦
4 rows display, 20 characters in each row.
♦
18 key pads
♦
2 LED's (Fail, Run)
♦
1
locking
key
4.1.1 Keypad
STANDBY
The ON/ST.BY key is located on the top right side of the panel.
Pressing the keypad lights up the operation panel. When there are 2
panels, both light up even though only one was pushed.
The 3 Command Keypads
F1-3: Functions 1-3
F1 F2 F3
These keypads are found under the display. The function to be performed will be
listed on the display above the keypad.
10 Digit keypads
These keypads are used for 2 purposes.
In normal working conditions, the program option is used – pressing on the
number keypad, for example no. 3 selects program 3.
Under display mode, the keypads will be used as number keypads to enter a
code or a number.
UP/DN Keypads
In normal working conditions they are used to browse through the
different cycles.
Under set-up mode they will change numeric values or cause the
display to progress to the next screen.
START Keypad
When the autoclave is in Ready position, pressing on START
key activates the cycle.
STOP
This key is active whilst the autoclave is in process. Pressing
this key at any stage of the cycle stops operation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
