Page 3 of 101 pages
A programming mode, which can be accessed by a code, enables the
technician to set a number of additional parameters and operation modes.
The keyboard located on the front panel enables the operator to start and stop the
cycle.
Optionally, a personal computer can be connected to the control system, through
the interface board RS232, which can be operated 8 meters away from the
autoclave. The PC, operating under
WINDOWS displays the status, data and
processing in real time in graphic and digital form at the same time recording and
logging the data.
The communication PC-control unit enables the complete control of the autoclave
through the PC, including program selection, starting and stopping the cycle,
setting of parameters and the real time clock (data and time of the day).
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
