Page 40 of 101 pages
4.3 Operating the Control Panel
4.3.1 Starting up the System
After turning on the system, the following screen is displayed for a few seconds:
After a few seconds the
Stand By
screen is displayed.
This is the central screen from which all operations can be performed.
It is also the “
Ready
” screen from where cycles can be started when all the relevant
conditions are fulfilled.
If the system is ready the display appears as follows:
If the system is not ready it will not allow you to start the cycle.
If, for example, Door1 is open when the system is turned on, the display will warn the
operator of this in the 3rd row of the display allocated to messages, and the screen will
appear as follows:
The 3 command keys in the Stand By screen are:
Above the left keypad (F1)
Show
Above the middle keypad (F2)
Option
Above the right keypad (F3)
Open
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
