Page 65 of 101 pages
9. PRINTER
9.1
Printer Operation
The autoclave is equipped with a character printer, which prints
out a process data enabling process follow up.
The data is printed on thermal paper recording the following
information:
♦
Software version (is printed only on Power On)
♦
Real time
♦
Selected
program
♦
Sterilization
pressure
♦
Sterilization temperature
♦
Sterilization exposure time
♦
Summary of performed cycle and identification hints.
During process, data is printed.
After the preliminary printing, the autoclave starts performing the
sequence of operations of the cycle. The measured values of
temperature and pressure are printed at (every two sec.) fixed
time intervals, according to the phase of the process, as shown
in the table below.
The data is printed from the bottom up, beginning with the date
and ending with “O.K.” for a complete cycle or “FAIL” for an
aborted cycle.
For an example of a typical printout, see next page.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
