Configuring Logical Interfaces
Logical Interfaces Configurations
Configuration Guide
379
IP Address Mode
Specify the IP address assignment mode of the interface.
None:
No IP address will be assigned.
Static:
Assign an IP address manually.
DHCP:
Assign an IP address through DHCP .
BOOTP:
Assign an IP address through BOOTP.
IP Address
Specify the IP address of the interface if you choose “Static” as the IP address
assignment mode.
Subnet Mask
Specify the subnet mask of the interface’s IP address.
Admin Status
Enable or disable the interface’s Layer 3 capabilities.
Interface Name
(Optional) Enter the name of the interface.
2) In the
Interface List
section, you can view the corresponding interface entry you
create.
2.1.2 Configuring IPv4 Parameters of the Interface
In
you can view the corresponding interface entry you create in the
Interface
List
section. On the corresponding interface entry, click
Edit
to load the following page and
configure the IPv4 parameters of the interface.
Figure 2-2
Configuring the IPv4 Parameters
1) In the
Modify Interface
section, specify an interface ID and configure relevant
parameters for the interface according to your actual needs. Then click
Apply
.
Interface ID
Select an interface type and enter the ID of the interface.
