Configuration Guide
56
Managing System
Access Security Configurations
Access
Interface
Select the interface to control the methods for users’ accessing. The selected
access interfaces will only affect the users you set before.
SNMP
: A function to manage the network devices via NMS.
Telnet
: A connection type for users to remote login.
SSH
: A connection type based on SSH protocol.
HTTP
: A connection type based on HTTP protocol.
HTTPS
: A connection type based on SSL protocol.
Ping
: A communication protocol to test the connection of the network.
IP Address/
Mask
If you select
IP-based
mode, enter the IP address and mask to specify an IP
range. Only the users within this IP range can access the switch.
MAC Address
If you select
MAC-based
mode, specify the MAC address. Only the users with the
correct MAC address can access the switch.
When the
IP-based
mode is selected, the following section will display.
IP Address
Displays the IP range of the entry.
Access
Interface
Displays the access interface you set of the entry.
Operation
Click
Edit
to modify the parameters of the desired entry.
When the
Port-based
mode is selected, the following section will display.
Port
Select one or more ports to configure. Only the users connected to these ports are
allowed to access the switch.
2) Click
Apply
.
