Configuring Layer 2 Multicast
Configuring MLD Snooping
Configuration Guide
315
3.1.6 Configuring MLD Profile
With MLD Profile, the switch can define a blacklist or whitelist of multicast addresses so as
to filter multicast sources, Choose the menu
Multicast > MLD Snooping > Profile Config
to load the following page.
Figure 3-6
Profile Create
Creating Profile
Follow these steps to create a profile and configure its filtering mode.
1) Create a profile and configure its filtering mode.
Profile ID
Enter a profile ID between 1 and 999.
Mode
Select
Permit
or
Deny
as the filtering mode.
Permit
: similar to a whitelist, means that the switch only allows specified member
ports to join specific multicast groups.
Deny
: similar to a blacklist, means that the switch disallows specific member ports
to join specific multicast groups.
2) Click
Create
.
Searching Profile
Enter the search condition in the
Search Option
field to search the profile in the MLD
Profile Info table.
