Configuring Layer 2 Multicast
Configuring MLD Snooping
Configuration Guide
325
Switch(config)#ipv6 mld snooping
Switch(config)#ipv6 mld snooping rtime
200
Switch(config)#ipv6 mld snooping mtime
200
Switch(config)#show ipv6 mld snooping
MLD Snooping :Enable
Unknown Multicast :Pass
Last Query Times :2
Last Query Interval :1
Global Member Age Time :200
Global Router Age Time :200
Global Report Suppression :Disable
Enable Port:
Enable VLAN:
Switch(config)#end
Switch#copy running-config startup-config
Configuring Fast Leave
Step 1
configure
Enter global configuration mode.
Step 2
interface {fastEthernet
port
| range fastEthernet
port-list
| gigabitEthernet
port
| range
gigabitEthernet
port-list
| port-channel
port-channel-id
| range port-channe
port-channel-list
}
Enter interface configuration mode
Step 3
ipv6 mld snooping immediate-leave
Enable Fast Leave on the specified port. With Fast Leave enabled on a port, the switch will
delete the port-multicast group entry from the multicast forwarding table once the port
receives a leave message. You should only use this function when there is a single receiver
present on the port.
Step 4
show ipv6 mld snooping interface [fastEthernet [
port
|
port-list
] |
gigabitEthernet [
port |
port-list
]]
basic-config
Show the basic MLD snooping configuration on the specified port(s) or of all the ports.
Step 5
end
Return to privileged EXEC mode.
Step 6
copy running-config startup-config
Save the settings in the configuration file.
