Managing System
Access Security Configurations
Configuration Guide
57
5.1.2 Configuring the HTTP Function
Choose the menu
System
>
Access Security
>
HTTP Config
to load the following page.
Figure 5-2
Configuring the HTTP Function
1) In the
Global Control
section, Select
Enable
and click
Apply
to enable the HTTP
function.
HTTP
HTTP function is based on the HTTP protocol. It allows users to manage the
switch through a web browser.
2) In the
Session Config
section, specify the Session Timeout and click
Apply
.
Session
Timeout
The system will log out automatically if users do nothing within the Session
Timeout time.
3) In the
Access User Number
section, select
Enable
and specify the parameters.
Number Control
Select
Enable
to control the number of the users logging on to the web
management page at the same time. The total number of users should be no more
than 16.
Admin Number
Specify the maximum number of users whose access level is Admin.
Guest Number
Specify the maximum number of users whose access level is Operator, Power
User or User.
Note:
For T1600G-18TS, the number of Operator, Power User and User can be set respectively.
4) Click
Apply
.
