Configuration Guide
98
Managing Physical Interfaces
Configuration Examples
Figure 7-2
Mirror Session List
2) Click
Edit
on the above page to load the following page. In the
Destination Port
section,
select port 1/0/1 as the monitoring port and click
Apply
.
Figure 7-3
Destination Port Configuration
3) In the
Source Port
section, select ports 1/0/2-5 as the monitored ports, and enable
Ingress
and
Egress
to allow the received and sent packets to be copied to the
monitoring port. Then click
Apply.
Figure 7-4
Source Port Configuration
4) Click
Save Config
to save the settings.
