Managing System
System Info Configurations
Configuration Guide
27
Current System
Time
Displays the current date and time of the switch.
Current Time
Source
Displays the current time source of the switch.
In the
Time Config
section, follow these steps to configure the system time:
1) Choose one method to set the system time and specify the information.
Manual
Set the system time manually.
Date
: Specify the date of the system.
Time
: Specify the time of the system.
Get Time from
NTP Server
Set the system time by getting time from NTP server.
Make sure the NTP server
is accessible on your network. If the NTP server is on the Internet, connect the
switch to the Internet first.
Time Zone
: Select your local time zone.
Primary Server
: Enter the IP Address of the primary NTP server.
Secondary Server
: Enter the IP Address of the secondary NTP server.
Update Rate
: Specify the interval the switch fetching time from NTP server, which
ranges from 1 to 24 hours. The default value is 12 hours.
Synchronize
with PC’s Clock
Synchronize the system time of the switch with PC’s clock.
2) Click
Apply
.
