Managing Physical Interfaces
Port Mirror Configuration
Configuration Guide
83
Figure 3-2
Configuring Port Mirror
Follow these steps to configure Port Mirror:
1) In the
Destination Port
section, specify a monitoring port for the mirror session, and
click
Apply
.
2) In the
Source Port
section, select one or multiple monitored ports for configuration.
Then set the parameters and click
Apply
.
UNIT:1/LAGS
Click
1
to select physical ports. Click
LAGS
to select LAGs.
Ingress
With this option enabled, the packets received by the monitored port will be
copied to the monitoring port. By default, it is disabled.
Egress
With this option enabled, the packets sent by the monitored port will be copied to
the monitoring port. By default, it is disabled.
