Configuration Guide
278
Configuring Layer 2 Multicast
IGMP Snooping Configurations
Editing IP Range of the Profile
Follow these steps to edit profile mode and its IP range:
1) Click
Edit
in the IGMP Profile Info table. Edit its IP range and click
Add
to save the
settings.
Figure 2-7
Add IP-range
Profile ID
Displays the ID of the profile to be edited.
Mode
Select
Permit
or
Deny
as the filtering mode.
Permit
: similar to a whitelist, means that the switch only allows specified member
ports to join specific multicast groups.
Deny
: similar to a blacklist, means that the switch disallows specific member ports
to join specific multicast groups.
Start IP
Specify the Start IP of the multicast IP range.
End IP
Specify the End IP of the multicast IP range.
2) In the IP-range Table, you can select an IP range and click
Delete
to delete an IP range.
3) Click
Submit
to save the settings; click
Back
to go back to the previous page.
2.1.7 Binding Profile and Member Ports
With this function, you can configure each port’s filtering profile and the number of
multicast groups a port can join. Choose the menu
Multicast > IGMP Snooping > Profile
Binding
to load the following page.
