Configuration Guide
378
Configuring Logical Interfaces
Logical Interfaces Configurations
2
Logical Interfaces Configurations
To complete IPv4 interface configuration, follow these steps:
1) Create a Layer 3 interface
2) Configure IPv4 parameters of the created interface
3) View detailed information of the created interface
To complete IPv6 interface configuration, follow these steps:
1) Create a Layer 3 interface
2) Configure IPv6 parameters of the created interface
3) View detailed information of the created interface
2.1 Using the GUI
2.1.1 Creating a Layer 3 Interface
Choose the menu
Routing> Interface > Interface Config
to load the following page.
Figure 2-1
Creating a Layer 3 Interface
1) In the
Creating Interface
section, specify an interface ID and configure relevant
parameters for the interface according to your needs. Then click
Create
.
Interface ID
Select an interface type and enter the ID of the interface.
