Toyota 2VZ-FE, Manual

Page: 27 / 324

10. INSTALL TIMING BELT TO LH CAMSHAFT TIMING
PULLEY
(a) Check that the installation mark on the timing belt
matches the end of the No.1 timing belt cover.
If the installation mark do not align, shift the meshing of the
timing belt and crankshaft timing pulley until they align.
(b) Remove any oil or water on the LH camshaft timing
pulley, and keep it clean.
(c) Using SST, slightly turn the LH camshaft timing pulley
clockwise. Align the installation mark on the timing belt
with the timing mark of the camshaft timing pulley, and
hang the timing belt on the LH camshaft timing pulley.
SST 09278–54012
(d) Using SST, align the timing marks of the LH camshaft
pulley and No.3 timing belt cover.
SST 09278–54012
(e) Check that the timing belt has tension between the
crankshaft timing and LH camshaft timing pulleys.
11. INSTALL RH CAMSHAFT TIMING PULLEY AND TIMING
BELT
(a) Remove any oil or water on the RH camshaft timing and
No.2 idler pulleys, and keep them clean.
(b) Align the installation mark on the timing belt with the
timing mark of the RH camshaft timing pulley.
(c) Hang the timing belt on the RH camshaft timing pulley,
facing the flange side inward.
(d) Align the timing marks of the RH camshaft timing pulley
and No.3 timing belt cover.
(e) Slide the RH camshaft timing pulley on the camshaft.
EM-25
ENGINE MECHANICAL – Timing Belt