System Resources
Viewing and Changing System Resources
Part III: Appendixes
464
Viewing and Changing System Resources
The following section provides instructions for viewing and
changing system resources determined by the operating system
you have chosen.
Running MS-DOS, or Windows 3.1x
If you are running MS-DOS v. 6.22, Windows v. 3.1x, or Win-
dows for Workgroups v. 3.11, refer to “TSETUP” on page 403 for
instructions on viewing and changing system resources for the fol-
lowing devices:
❖
VGA BIOS Address
❖
Communication Ports (Serial I/O and IRQ, IrDA I/O, IRQ and
DMA, Built-in modem I/O and IRQ, Bi-Directional Parallel
I/O, IRQ and DMA, ECP Parallel I/O, IRQ and DMA)
❖
Sound System (WSS I/O, SBPro I/O, Synthesizer I/O, WSS
and SBPro IRQ, WSS and SBPro DMA, Control I/O)
❖
PCI Bus IRQ
❖
Disk Drives (HDD and CD-ROM for Desk Station V Plus
SelectBay and 5.25-inch Drive Bay)
Most of the system resources for these devices can be
changed in TSETUP. If there is a resource conflict, TSETUP
will warn you when you try to exit the program.
Remember to update drivers and program settings to reflect
your changes in system resources.