If Something Goes Wrong
Fixing Device Related Problems
Part I: Getting To Know Your Computer
317
Fixing Device Related Problems
If you don’t have a hardware conflict, but you think your problem
could be related to one of your computer’s devices, the first thing
to do is run a system verification test. A system verification test
confirms that all the devices connected to the computer are work-
ing. This includes testing the memory, hard disk, diskette drive,
display, and additional devices you may have connected to the
system.
Then read the relevant parts of this section which describes prob-
lems and solutions related to specific devices.
Running the System Verification Test
To verify the system when Resume Mode is off, follow these
steps:
1 Turn the computer off.
2 Hold the spacebar while you press the power button.
To verify the system when Resume Mode is on, hold down the
spacebar while you press the reset button.
System verification displays the following message for a few
seconds as the computer tests memory:
(C) Copyright 19>xx Toshiba Corp. All rights reserved.
MEMORY TEST xxxxKB
Successful Test Results
If the test verifies that all components connected to the system
are working properly, the computer beeps once then starts
Windows 95.
