Disengaging the Drum Drive from the Transmission
The traction drum is driven by a multi-ribbed belt that is tensioned with a
spring loaded idler assembly. To disengage the traction drum drive from the
transmission, do the following procedure:
1. Park the machine on a level surface, turn the key switch to the O
FF
position,
and remove the key from the key switch. Disconnect the battery pack; refer
to
Connecting the Lithium Battery Pack (page 4–3)
.
g203650
Figure 11
1.
Traction lever (engaged)
2.
Right handle clamp
2. Locate the traction engage/disengage lever next to the right drive housing
drum (
CAUTION
Be careful when rotating the traction engage/disengage lever. The
lever is spring loaded and may cause personal injury.
Push the lever from the front when removing belt tension to prevent
unexpected movement of the lever.
3. Rotate the traction engage/disengage lever toward the rear of the machine to
the disengaged position to remove tension from the drum drive belt.
4. To engage the drum drive, rotate the traction engage/disengage lever to the
engaged position by rotating the lever toward the front of the machine.
5. Connect the battery pack; refer to
Connecting the Lithium Battery Pack
(page 4–3)
.
Traction and Reel Drive System: General Information
Page 4–4
Greensmaster
®
eFlex 1800, 2100 and 2120
12189SL Rev E
