Toro Greensmaster eFlex 1800, Service Manual

Page: 206 / 312

Assembling the Traction and Reel Drive Engagement Lever Assembly
1. Assemble the traction lever assembly ( Figure 140 and Figure 141 ).
g198906
Figure 142
1. Transport lever 3. Latch pin
2. Shift arm link 4. Shift link tab
g198907
Figure 143
1. Transport lever 4. Reel shaft lever
2. Shifter bracket 5. Clearance location
3. Screw and nut
2. If the shift arm link (item 23 in Figure 140 ) was removed from the transport
lever, ensure that the tab on the shift arm link is positioned toward the solid
end of the latch pin (
Figure 142 ).
Note: One of the mounting holes in both the switch mount bracket and shift
mount is elongated to allow for adjustment of clearance between the transport
lever (item 28 in
Figure 140 ) and the reel shift lever (item 14 in Figure 140 ).
3. Secure the switch mount bracket and shift mount to the shifter bracket with
the 2 flange-head screws (item 13 in Figure 141 ) and 2 flange nuts. Before
you fully tighten the fasteners, position the legs of the shifter bracket to get
1.0 mm (0.040 inch) clearance between the transport lever and the reel shift
lever (
Figure 143 ).
Chassis and Controls: Service and Repairs Page 6–16 Greensmaster ® eFlex 1800, 2100 and 2120
12189SL Rev E