Bedbar Assembly
g206881
Figure 159
eFlex 2100/2120
1.
Bedbar adjuster shaft
(2 each)
7.
Plastic washer (4 each)
13.
Retaining ring (2 each)
2.
Bedknife
8.
Screw (13 each)
14.
Wave washer (2 each)
3.
Detent (2 each)
9.
Locknut (2 each)
15.
Nylon bushing (2 each)
4.
Bolt (2 each)
10.
Compression spring (2 each)
16.
Bedbar pivot bolt (2 each)
5.
Bedbar
11.
Washer (2 each)
17.
Locknut (2 each)
6.
Metal washer (4 each)
12.
Bedbar adjuster screw
(2 each)
18.
Rubber bushing (2 each)
Removing the Bedbar
1. Park the machine on a level surface, turn the key switch to the O
FF
position
and remove the key from the switch. Ensure that the traction lever is in the
N
EUTRAL
position.
2. Disconnect the battery pack; refer to
Connecting the Lithium Battery Pack
(page 7–3)
.
3. Remove the cutting unit from the machine and place the cutting unit on
a flat work area.
Cutting Unit: Service and Repairs
Page 7–10
Greensmaster
®
eFlex 1800, 2100 and 2120
12189SL Rev E
