Disassembling the Traction and Reel Drive Engagement Lever Assembly
1. Park the machine on a level surface, turn the key switch to the O
FF
position,
and remove the key from the switch. Disconnect the battery pack; refer to
Connecting the Lithium Battery Pack (page 6–3)
.
g198905
Figure 141
1.
Reel engage switch
8.
Lower handle
2.
Switch mount bracket
9.
Screw (4 each)
3.
Traction lever assembly
10.
Console cover
4.
Spring
11.
Shift mount
5.
Flange-head screw (4 each)
12.
Traction switch
6.
Shifter bracket
13.
Flange-head screw (2 each)
7.
Flange nut (4 each)
14.
Flange nut (2 each)
2. Remove the console cover from the handle to get access to the traction
lever assembly (
).
3. Disconnect the reel clutch cable from the traction lever assembly; refer to
Replacing the Reel Clutch Cable (page 6–10)
. Position the end of the cable
away from the traction lever assembly.
4. Disconnect the wire harness connectors from the traction and reel engage
switches (
).
5. Disconnect the spring (item 4 in
) that connects operator presence
control with the traction lever assembly.
6. Remove the 4 flange-head screws (item 5 in
) and 4 flange nuts
that secure the traction lever assembly and brackets to the handle. Remove
the assembly (including lever assembly, shifter bracket, shift mount, and
switch mount bracket) from the handle.
7. Remove the 2 flange-head screws (item 13 in
) and 2 flange nuts
that secure the switch mount bracket and shift mount to the shifter bracket.
Separate the brackets to allow disassembly of the traction lever assembly.
8. Disassemble the traction lever assembly (
and
). Note
the orientation of the end hooks on all the springs for assembly purposes.
Greensmaster
®
eFlex 1800, 2100 and 2120
Page 6–15
Chassis and Controls: Service and Repairs
12189SL Rev E
