Installing the Groomer Reel
1. Position the cutting unit on a level surface. If the cutting unit is attached to the
traction unit, set the parking brake, and remove the key from the key switch.
2. Position the groomer reel between the groomer output and stub shafts.
3. Secure the groomer reel to the cutting unit with the 4 jam nuts, 4 bolts, and 4
shaft clamps; torque the bolts to
5 to 7 N∙m (45 to 60 in-lb)
.
4. Check the groomer reel height and mower height-of-cut settings. Adjust
as necessary.
Greensmaster
®
eFlex 1800, 2100 and 2120
Page 9–13
Universal Groomer (Optional): Service and Repairs
12189SL Rev E
