Separating the Cutting Unit from the Traction Unit (continued)
g207107
Figure 154
1.
Cutting unit pitch arm
2.
Flange-head screw
3.
Traction unit roll frame
6. Loosen the 2 flange-head screws that secure cutting unit pitch arms to the
traction unit roll frame. It is not necessary to completely remove the screws
(
).
7. Rotate the pitch arms forward and rest traction unit against the kickstand.
8. Roll the cutting unit away from the machine.
9. Reverse the procedure to install the cutting unit to the traction unit.
10. After the cutting unit is installed to the traction unit, connect the battery pack;
refer to
Connecting the Lithium Battery Pack (page 7–3)
.
Greensmaster
®
eFlex 1800, 2100 and 2120
Page 7–5
Cutting Unit: General Information
12189SL Rev E