Disassembling the Transport Wheel (continued)
6. If necessary, remove the shoulder screws, torsion spring, and retaining lever
from the hub.
Assembling the Transport Wheel
1. If the shoulder screws were removed from the hub, apply Loctite #242 (or
equivalent) to the threads of the shoulder screws. Secure the torsion spring
and retaining lever to the hub with the shoulder screws.
2. Assemble the tire, tube, and deep rim.
3. Install the shallow rim into the tire. Align and secure the shallow rim to the
deep rim with the 4 bolts (item 12 in
) and 4 flange nuts. Tighten
the fasteners.
4. Install the hub into the deep rim. Secure the hub to the deep rim with the 3
bolts (item 1 in
) and 3 lock washers. Tighten the fasteners.
5. Inflate the tire to
83 to 103 kPa (12 to 15 psi)
.
Installing the Transport Wheel
1. Ensure that the machine is parked on a level surface and the key is removed
from the key switch.
2. Support the machine on the kickstand.
3. Slide the transport wheel completely onto the wheel hex shaft until the wheel
retaining lever is secured into the groove on the wheel hex shaft.
Greensmaster
®
eFlex 1800, 2100 and 2120
Page 6–23
Chassis and Controls: Service and Repairs
12189SL Rev E
