Thermo Scientific 5028i, Instruction Manual

Page: 85 / 330

Operation
Instrument Controls Menu
Thermo Fisher Scientific Model 5028
i
Instruction Manual 3-31
The Flag Status Data screen is used to set the flag status data to either
ON or OFF for the selected record type.
l
In the Main Menu, choose Instrument Controls > Datalogging
Settings > Configure Datalogging > Flag Status Data .
SET LREC FLAG STATUS DATA:
CURRENTLY: OFF
SET TO: ON ?
CHANGE VALUE SAVE
RANGE AVG DIAGS ALARM
The Communication Settings menu is used for communications control
and configuration.
l
In the Main Menu, choose Instrument Controls >
Communication
Settings .
COMMUNICATION SETTINGS:
>SERIAL SETTINGS
INSTRUMENT ID
GESYTEC SERIAL NO
COMMUNICATION PROTOCOL
STREAMING DATA CONFIG
RANGE AVG DIAGS ALARM
TCP/IP SETTINGS
The Serial Setting submenu is used for serial communications control
and configuration.
l
In the Main Menu, choose Instrument Controls > Communication
Settings > Serial Settings .
SERIAL SETTINGS:
>BAUD RATE 9600
DATA BITS 8
PARITY NONE
STOP BITS 1
RS-232/485 SEL RS-232
RANGE AVG DIAGS ALARM
The Baud Rate screen is used to set the RS-232/RS-485 interface baud
rate. Baud rates of 1200, 2400, 4800, 9600, 19200, 38400, 57600, and
115200 are available. The analyzer’s default baud rate is set to 9600 to
provide backwards compatibility with the older C-series analyzers.
l
In the Main Menu, choose Instrument Controls > Communication
Settings > Serial Settings > Baud Rate .
Flag Status Data
Communication Settings
Serial Settings
Baud Rate