Thermo Scientific 5028i, Instruction Manual

Page: 88 / 330

Operation
Instrument Controls Menu
3-34 Model 5028
i
Instruction Manual Thermo Fisher Scientific
GESYTEC SERIAL NO:
CURRENTLY: 0
SET TO: 1 ?
CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
The Communication Protocol screen is used to change the protocol
for serial communications. Possible choices include:ESM, C-Link,
MODBUS, Gesytec, and Streaming Data.
l
In the Main Menu, choose Instrument Controls > Communication
Settings >
Communication Protocol
.
COMMUNICATION PROTOCOL:
CURRENTLY: CLINK
SET TO: STREAMING ?
CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
The Streaming Data Configuration menu is used to allow for
configuration of the 8 streaming data output items, streaming interval,
current data format, and current timestamp setting. The Choose Stream
Data submenu displays a list of the analog output signal group choices
to choose from. Choices are Concentrations, Other Measurements, and
Analog Inputs (if the I/O expansion board option is installed).
l
In the Main Menu, choose Instrument Controls > Communication
Settings >
Streaming Data Config
.
STREAMING DATA CONFIG
>INTERVAL 10 SEC
ADD LABELS NO
PREPEND TIMESTAMP YES
ADD FLAGS YES
ITEM 1 PM
RANGE AVG DIAGS ALARM
ITEM 3 PM
ITEM 2 PM
The Streaming Data Interval screen is used to adjust how frequently a
new record will be generated. The following interval times are available:
1, 2, 5, 10, 20, 30, 60, 90, 120, 180, 240, and 300 seconds.
l
In the Main Menu, choose Instrument Controls > Communication
Settings > Streaming Data Config >
Interval
.
Communication Protocol
Streaming Data Configuration
Streaming Data Interval