Thermo Scientific 5028i, Instruction Manual

Page: 296 / 330

C-Link Protocol Commands
I/O Configuration
B-56 Model 5028
i
Instruction Manual Thermo Fisher Scientific
Send: analog vin 1
Receive: analog vin 1 75.325, 2.796 V
analog vout range channel
This command reports the analog voltage output channel range, where
channel is between 1 and 6 inclusive, according to Table B–12 . The
following example reports that analog voltage output channel 2 is set to
3 (0-10 V).
Send: analog vout range 2
Receive: analog vout range 2 3
set analog vout range channel range
This command sets analog voltage output channel to the range , where
channel is between 1 and 6 inclusive, and range is set according to Table
B–12 . The following example sets channel 2 to the 0-10 V range.
Send: set analog vout range 2 3
Receive: set analog vout range 2 3 ok
Table B–12. Analog Voltage Output Range Values
Range
Output Range
1 0-1 V
2 0-100 mV
3 0-10 V
4 0-5 V
0 [cannot be set to this, but may report] Undefined
dig in
This command reports the status of the digital inputs as a 4-digit
hexadecimal string with the most significant bit (MSB) being input 16.
Send: dig in
Receive: dig in 0xffff
din
channel
This command reports the action assigned to the digital input
channel and the index number of the corresponding active state. The
following example reports input 1 to be assigned an index number 3
corresponding to action of “PM mode” with the active state being high.
Send: din 1
Receive: din 1 3 PM MODE high