Thermo Scientific 5028i, Instruction Manual

Page: 92 / 330

Operation
Instrument Controls Menu
3-38 Model 5028
i
Instruction Manual Thermo Fisher Scientific
The Netmask screen is used to edit the netmask. The netmask is
used to determine the subnet on which the instrument can directly
communicate to other devices. The netmask can only be changed when
DHCP is off. If DHCP is on, the instrument will respond with “NOT
SETTABLE IF DHCP IS ON”. For more information on DHCP, see
“ Use DHCP ” above.
l
In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings >
Netmask
.
NETMASK:
CURRENT: 255.255.252.0
SET TO: 255.255.254.0 0
MOVE CURSOR
CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
The Default Gateway screen is used to edit the gateway address. The
default gateway can only be changed when DHCP is off. If DHCP is
on, the instrument will respond with “NOT SETTABLE IF DHCP
IS ON”. For more information on DHCP, see “ Use DHCP ” above.
Any traffic to addresses that are not on the local subnet will be routed
through this address.
l
In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Gateway .
DEFAULT GATEWAY:
CURRENT: 10.209.42.1
SET TO: 10.68.178.1
MOVE CURSOR
CHANGE VALUE
SAVE VALUE
RANGE AVG DIAGS ALARM
The Host Name screen is used to edit the host name. When DHCP is
enabled, this name is reported to the DHCP server.
l
In the Main Menu, choose Instrument Controls > Communication
Settings > TCP/IP Settings > Host Name .
HOST NAME:
CURRENT: ISERIES
I SERIES SSSSS ?
ABCDEFGHIJKLMN BKSP
OPQRSTUVWXYZ PAGE
0123456789 ./- SAVE
RANGE AVG DIAGS ALARM
Netmask
Default Gateway
Host Name